Who are we

If you’re switching between a bucket and a power rake just to get a clean finish, you’re wasting time and fuel on every job. The Hydra Bucket replaces both. It cuts, levels, and finishes in one pass.  Built specifically for contractors who want professional-grade results without running multiple attachments. Whether you're prepping seedbeds, grading driveways, cleaning up fence lines, or conditioning soil, this attachment increases efficiency and reduces labor hours on every project. Own it for around $200/month with financing available. Does the Hydra-Bucket work in clay soil? Yes, but adjust your passes to the ground. Drier soil clumps less. In wet soil or clay, take shallower passes rather than trying to work too much material at once. The rotor spins in both directions; reversing it can kick out a stuck clump. Hydra-Bucket or Mini Hydra-Bucket? The Hydra-Bucket comes in 66, 72, 78 and 84-inch widths and runs on low/standard flow, with a 24 GPM maximum. High flow is not recommended or warrantied. For a mini skid steer, compare the Mini Hydra-Bucket, which comes in 36 to 60-inch widths with a 20 GPM maximum. Check attachment weight, your machine's capacity and mounting compatibility as well as hydraulic flow before choosing. For examples of the work each tool covers, read Hydra-Bucket jobsite preparation and the Hydra-Bucket dual-action guide. Compare dedicated leveling and blade-grading options in our grading and leveling attachments. Key Features: Durable Construction: Made from high-strength AR400, AR200, and Grade 50 steel for maximum durability. Integrated Hydraulic Motor: Features a Char-Lynn hydraulic motor delivering 6,700 in/lbs of torque, housed inside the drum for ultimate protection. Built for Low/Standard Flow: Only standard flow required, 24GPM max. High flow is not recommended or warrantied, it’s designed to cut in low flow. Triple-Sealed Bearings: 5" oversized ball bearings are triple-sealed to guard against environmental damage. Carbide Teeth: Equipped with ultra-hard carbide cutter teeth on the drum for effective shredding and pulverizing. Dual Cutting Edges: Two cutting edges lead up to the drum, enhancing its material processing capabilities. Crossover Relief Valves: These valves help dampen shocks to the hydraulic system, ensuring smooth operation. Compact Design: The direct-drive motor design protrudes only 2.5" beyond the side plate, offering enhanced control and safety. US Patent No. 9790658 B2https://patents.google.com/patent/US9790658B2/en Specifications: Models and Dimensions: HB66: 66" width, 11.25 ft³ struck volume, 17.5 ft³ heaped volume, 870 lbs HB72: 72" width, 12.375 ft³ struck volume, 19 ft³ heaped volume, 915 lbs HB78: 78" width, 13.375 ft³ struck volume, 20.75 ft³ heaped volume, 960 lbs HB84: 84" width, 14.375 ft³ struck volume, 22.5 ft³ heaped volume, 1,015 lbs Usage and Benefits: The Hydra Bucket is designed for various applications such as soil conditioning, seedbed preparation, and material leveling. It can effectively handle dirt, gravel, and other materials, making it a versatile tool for different tasks. Its ability to pulverize and shred materials on the go significantly enhances efficiency and reduces the need for multiple attachments. Customer Testimonials: Ken G. from North Dakota: "We use our Hydra Bucket for grading and prepping fence lines. It's also great in the winter for grinding ice in the barnyard. It’s been a great investment." John D. from Texas: "The Hydra Bucket has significantly improved our efficiency on the job site. It's built tough and handles everything we throw at it." Warranty Information: Comprehensive 1 year warranty included. Shipping Information: Flat rate shipping based on your location. (Cost Determined At Checkout Based On Location)

The SSHA is a 4-blade skid steer grader with hydraulic blade adjust from the cab. It is sold in 72, 84, and 96 inch widths and mounts on a universal quick attach plate. If you do not need hydraulic adjust, see the manual SSMA and the fixed SSF in the table below. Financing available through ElmBlue, from $199/mo. Returns are 30 days from delivery. 1-Year Manufacturer Warranty Specs and fitment Spec SSHA-72 SSHA-84 SSHA-96 Blade width 72 inch (6 ft) 84 inch (7 ft) 96 inch (8 ft) SKU SSHA72B SSHA84B SSHA96B Current price $5,795 $6,080 $6,455 Weight 1,220 lb 1,470 lb 1,720 lb Recommended power 60 HP 70 HP 70 HP Overall width 89 in 101 in 113 in Height 22 in 22 in 22 in Length 69 in 69 in 69 in Blade adjust Hydraulic, from the cab Blade count 4 Frame 4 inch tube with 1/4 inch wall Mount Universal quick attach, for skid steers and front-loader tractors Skid shoes 1 1/2 inch thick solid steel, rotatable and bolt-on Origin Made in the USA Warranty 1-Year Manufacturer Warranty Pick the width that fits your machine and the work you do. Recommended power on the manufacturer spec table is 60 HP for the 72 inch model and 70 HP for the 84 and 96 inch models. Hydraulic flow (GPM) is not listed on the manufacturer spec table, so confirm flow with us if you are unsure. Contact us with your machine model if you want a fit check. Compare SSN 4-blade graders Model Blade adjust Widths and current prices Weight Recommended HP Warranty SSHA Hydraulic Adjustable 4-Blade Hydraulic, from the cab 72 in $5,795; 84 in $6,080; 96 in $6,455 1,220 / 1,470 / 1,720 lb 60 / 70 / 70 HP 1-Year Manufacturer Warranty SSMA Manual Adjustable 4-Blade Manual, 2-bolt adjust, five blade configurations 72 in $4,955; 84 in $5,235; 96 in $5,515 1,000 / 1,120 / 1,220 lb 60 / 70 / 70 HP 1-Year Manufacturer Warranty SSF Fixed Position 4-Blade Fixed. Blade holders are welded in place. 72 in $4,580; 84 in $4,860; 96 in $5,140 980 / 1,110 / 1,250 lb 50 / 60 / 75 HP 1-Year Manufacturer Warranty Choose SSHA if you want to change blade angle from the cab. Choose SSMA if you are fine adjusting with the 2-bolt setup. Choose SSF if you want the fixed 4-blade grader at the lowest price in this family.

Some clearing jobs are past what a bucket or a light grapple can handle. Standing trees, fence lines grown into the dirt, buried root balls that won't let go. The Dominator is built for exactly that. It is a tree and brush pulling grapple that clamps down with 1" thick AR400 steel jaws and tears roots out of the ground instead of just pushing them around. If you clear land for a living, this is the attachment that turns a two-day fight into an afternoon. The included Grapple Guard adds a powered upper clamp, so you can grip a tree trunk and pull it with the root ball attached rather than snapping it off at the base and leaving the stump for later. Specs and hydraulic requirements The Dominator is heavy-duty from the frame out, weighing over 1,340 lbs with the Grapple Guard installed: Jaws: 1" thick AR400 high-strength steel with bolt-on AR400 root rippers and serrated sides Opening: 60" to grab large trunks and root balls Cylinders: twin 3.5" x 8" cross-tube welded cylinders producing 33,000 lbs of force each, over 66,000 lbs combined Frame: 3/4" vertical jaw braces, 3/4" upper and lower frame plates, 4" x 4" x 3/8" cross tubes Cylinder protection: 3/8" plate guards shield the cylinders when digging or pulling Pivots: 2" diameter CF 1045 main pivot pins with grease fittings at every point Hydraulics: includes 4,780 PSI hoses and flat-faced couplers Operation: dig and pull with the jaws open or closed Finish: abrasive blasted and powder coated The Grapple Guard wiring harness is included and ships ready to run. Bobcat machines use a 7-pin connection and carry an additional cost; all other makes use the 14-pin setup. We call you after you order to confirm your make and model. Does it fit your machine? The Dominator mounts with universal quick attach and fits standard skid steers and compact track loaders, including Bobcat, John Deere, Kubota, Cat, Takeuchi, New Holland, Case, and Gehl. The only machine-specific detail is the electrical connection for the Grapple Guard: Bobcat runs a 7-pin plug, everything else runs 14-pin. Pick your variant to match, and we verify it with you before the unit ships. Dominator grapple vs a standard grapple bucket vs a tree puller A grapple bucket like the EZ Grapple is built to scoop and carry brush, rock, and loose debris. The Dominator is built to pull. Its dual cylinders and root rippers let it extract standing trees and buried root balls that a bucket grapple would only drag. Compared to a dedicated tree puller with no grapple, the Dominator's powered upper clamp means you keep hold of the tree and the root ball together instead of losing the top once it breaks free. If your work is cleanup and material handling, buy the grapple bucket. If your work is taking trees and stumps out at the root, this is the tool.

Description:The Miller Stump Grinder offers the same power and productivity of a self-contained commercial unit at a fraction of the cost available for high flow skid loaders.It comes with a 26 inch grinding wheel with cutting teeth on both sides to slide smoothly through tough material. The grinding wheel six wheel positioning has swing, lift and telescoping functions which allow you to eliminate a stump without having to reposition your machine, helping protect you and your machine from flying debris. The chain guard also reduces material buildup within the skid steer tracks finish the job with the push blade and effortlessly fill any hole created while clearing stumps.**Please note that this product is experiencing long lead times.  Please contact us before ordering.** Features: 6-way grinding wheel positioning with swing, lift, and telescoping functions Radial piston motor features higher torque and increased power Dual-direction cutting with carbide teeth on both sides of the wheel for maximum productivity 1" thick grinding wheel for smooth cutting Available for HIGH FLOW skid loaders Specification: Wheel Diameter: 26" Weight: 1,640 lbs. Number of Teeth: 30 Hydraulic Flow Rating: 29 - 45 GPM Shipping:Flat Rate Shipping On All Orders (Cost Determined At Checkout Based On Location)