{"title":"Machine Control","description":"\u003ch2\u003eMachine Control for Skid Steer, Excavator, and Dozer Applications\u003c\/h2\u003e\n\u003cp\u003eGrade faster, cut rework, and hit your tolerances the first time. Machine control systems give you real-time GPS guidance and grade feedback so you spend less time checking grades by hand and more time moving dirt. Built for contractors running grading, site prep, and earthwork jobs where accuracy directly affects your bottom line.\u003c\/p\u003e\n\n\u003ch2\u003eHow to Choose the Right Machine Control System\u003c\/h2\u003e\n\u003cp\u003eStart with your machine type. GPS machine control for skid steers works differently than systems built for excavators or dozers, so match the system to the machine you run most. Next, decide between 2D and 3D machine control. A 2D system handles slope and cross-slope work, while 3D machine control ties into a full site model and is worth it on complex grading jobs or large earthwork projects. If you are running finish grading or need sub-inch accuracy, grade control for skid steer applications with a sonic or laser sensor gives you tighter tolerances than GPS alone on smaller pads and flatwork.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMachine compatibility: confirm the system is rated for your make, model, and lift arm configuration\u003c\/li\u003e\n  \u003cli\u003e2D vs. 3D: 2D works for simple slopes, 3D is built for site model-driven grading and mass earthwork\u003c\/li\u003e\n  \u003cli\u003eGPS accuracy: know whether you need sub-foot or sub-inch tolerances before choosing a base station setup\u003c\/li\u003e\n  \u003cli\u003eCab integration: check display size, mounting options, and whether the system supports your existing telematics\u003c\/li\u003e\n  \u003cli\u003eSupport and calibration: factor in local dealer support, especially for base station setup and software updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy Contractors Choose Skid Steer Nation\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmerican Made:\u003c\/strong\u003e You get attachments built in the U.S. with materials and labor you can stand behind on any job site.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Warranty:\u003c\/strong\u003e Every product comes backed by a manufacturer warranty so you are covered if something goes wrong.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlat Rate Freight Shipping Nationwide:\u003c\/strong\u003e One flat shipping rate no matter where your yard is, so you know your landed cost before you order.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinance from $199\/mo:\u003c\/strong\u003e Keep cash in the business and get the equipment on your machine now instead of waiting to save up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is machine control for skid steer?\u003c\/h3\u003e\n\u003cp\u003eMachine control for skid steer is a GPS or sensor-based guidance system that gives you real-time grade and elevation feedback from inside the cab. It tells you when you are on grade, above it, or below it without a grade checker standing in front of your machine. Some systems automate bucket or blade movement to hold grade automatically.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the difference between 2D and 3D machine control?\u003c\/h3\u003e\n\u003cp\u003eA 2D system works off slope angles and is built for simple cross-slope or single-plane grading. A 3D machine control system connects to a digital site model and guides you across complex grade changes, curves, and elevation transitions. For most finish grading and sitework contractors, 3D is worth the investment on jobs with detailed engineered plans.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use grade control on a skid steer for finish grading?\u003c\/h3\u003e\n\u003cp\u003eYes. Grade control for skid steer is well-suited to finish grading, parking lot prep, and pad work where you need consistent tolerances across a flat or sloped surface. Pair it with a laser or sonic sensor for the tightest accuracy on small to mid-size pads. GPS alone works fine for rough grade passes but laser-assisted systems are more reliable for finish work.\u003c\/p\u003e\n\n\u003ch3\u003eHow accurate is GPS machine control on a skid steer?\u003c\/h3\u003e\n\u003cp\u003eAccuracy depends on the type of GPS correction you use. A network RTK or base station setup can get you to plus or minus half an inch, which is enough for most grading specs. Standard GPS without correction runs closer to a foot of accuracy, which works for rough grade but not finish. Confirm the correction method before you buy if tolerances matter\u003c\/p\u003e","products":[{"product_id":"benchmark-supply-f8-rover-surveying-package-i89-rsv","title":"Benchmark Supply F8 Rover GPS Surveying Package (i89-RSV)","description":"\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e Channels\u003c\/strong\u003e: 1408\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Constellations\u003c\/strong\u003e: GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e RTK Initialization\u003c\/strong\u003e: Typically \u0026lt; 10 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e RTK Accuracy\u003c\/strong\u003e: H: 8 mm + 1 ppm RMS; V: 15 mm + 1 ppm RMS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e IMU Tilt Compensation\u003c\/strong\u003e: Up to 60°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Internal UHF Radio\u003c\/strong\u003e: 1W (410–470 MHz), range up to 8 km (optimal conditions)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Battery Life\u003c\/strong\u003e: Up to 16.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Communication Interfaces\u003c\/strong\u003e: Bluetooth, Wi-Fi, NFC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Ports\u003c\/strong\u003e: USB Type-C, external antenna port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Ingress Protection\u003c\/strong\u003e: IP68\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Shock Resistance\u003c\/strong\u003e: 2 m pole drop on concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Operating Temperature\u003c\/strong\u003e: -40°F to 149°F (-40°C to +65°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eProduct Description\u003c\/h5\u003e\n\u003cp\u003eThe Benchmark Supply's F8 Rover Surveying Package is a complete field-ready RTK solution for surveyors who need precision, speed, and flexibility in demanding environments.\u003c\/p\u003e\n\u003cp\u003eThe F8 GNSS receiver (Innovation by CHC, Performance for You) featuring 1408 channels and advanced iStar 2.0 technology for robust signal tracking across all satellite constellations, even in obstructed environments. Designed with dual cameras, the F8 enables visual stakeout and AR-based navigation, streamlining workflows in topographic, construction, and mining surveys.\u003c\/p\u003e\n\u003cp\u003eEquipped with a high-speed 200Hz auto-IMU, the F8 offers tilt compensation up to 60° with minimal accuracy loss, reducing setup time and improving productivity on sloped terrain. The built-in 1W UHF radio supports RTK corrections up to 8 km in optimal conditions, and with NTRIP compatibility and SIM support, users can work reliably in any field configuration.\u003c\/p\u003e\n\u003cp\u003eIncluded in this rover package is an 8\" Active5 Android tablet pre-installed with LandStar 8 software, a modular survey app with MetaCAD engine and cloud connectivity for seamless jobsite management, and one-year subscription of Control Point Corrections TrueRTK (powered by Point One Navigation) for centimeter-level accuracy. Rugged accessories like a carbon fiber pole, topo shoe, clamp and bipod complete the package.\u003c\/p\u003e\n\u003ch5\u003eIn the Box\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) F8 GNSS Receiver\u003c\/li\u003e\n\u003cli\u003e(1) 8\" Active5 Tablet\u003c\/li\u003e\n\u003cli\u003e(1) SitePro Pole Clamp w\/ Ball and Socket (10-52160)\u003c\/li\u003e\n\u003cli\u003e(1) Socket Arm (RAM-B-103U)\u003c\/li\u003e\n\u003cli\u003e(1) LandStar 8 App\u003c\/li\u003e\n\u003cli\u003e(1) Tiger Supplies Wide Base Topo Shoe\u003c\/li\u003e\n\u003cli\u003e(1) Seco Thumb-Release Bipod - Fluorescent Yellow\u003c\/li\u003e\n\u003cli\u003e(1) Unicontrol Tablet Holder 8'\u003c\/li\u003e\n\u003cli\u003eCPC TrueRTK (1 Year Subscription)\u003c\/li\u003e\n\u003cli\u003eiSite 1 Year Support \u0026amp; Data Super SIM Plan\u003c\/li\u003e\n\u003cli\u003eTablet Power Bank Kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Benchmark Tool \u0026 Supply","offers":[{"title":"Default Title","offer_id":47850562027771,"sku":"i89-RSV","price":11675.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/1540\/9743\/files\/Benchmark_Supply_F8_Rover_Surveying_Package.jpg?v=1768238865"},{"product_id":"chcnav-td63-pro-3d-automatic-control-system-for-dozers","title":"CHCNav TD63 Pro 3D Automatic Dozer Control System","description":"\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type\u003c\/strong\u003e: Automatic 3D dozer control with hydraulic blade automation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositioning\u003c\/strong\u003e: Dual GNSS + IMU (100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy\u003c\/strong\u003e: ±2 cm (DO-Tech algorithm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal Accuracy (RTK)\u003c\/strong\u003e: 10 mm + 1 ppm RMS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Accuracy (RTK)\u003c\/strong\u003e: 15 mm + 1 ppm RMS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay (Tablet)\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eScreen: 10.1″, 1024 × 600 px, 750 cd\/m² sunlight readable\u003c\/li\u003e\n\u003cli\u003eOperating System: Android 6.0.1, 4-core 1.5 GHz CPU, 2 GB RAM + 16 GB ROM\u003c\/li\u003e\n\u003cli\u003eIngress Protection: IP65\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -4°F to 158°F (−20°C to +70°C)\u003c\/li\u003e\n\u003cli\u003eSize\/Weight: 3.30 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGNSS Receiver\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eFull constellations: GPS, GLONASS, Galileo, BeiDou, QZSS\u003c\/li\u003e\n\u003cli\u003eRTK Accuracy: H: 10 mm + 1 ppm RMS; V: 15 mm + 1 ppm RMS\u003c\/li\u003e\n\u003cli\u003eIngress: IP65\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -13°F to +167°F (−25°C to +75°C)\u003c\/li\u003e\n\u003cli\u003eWeight: 4.40 lbs.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGNSS Antenna\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eGain: 40 ± 2 dB\u003c\/li\u003e\n\u003cli\u003eNoise Coefficient: ≤ 2 dB\u003c\/li\u003e\n\u003cli\u003eShock: 50 g\/ 6 ms\u003c\/li\u003e\n\u003cli\u003eVibration: 5 grms (2–250 Hz)\u003c\/li\u003e\n\u003cli\u003eIngress: IP68\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -4°F to 158°F (−20°C to +70°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIMU Sensor\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eAccuracy: Dynamic: ±0.3° ; Static: ±0.1°\u003c\/li\u003e\n\u003cli\u003eShock: 50 g\/6 ms\u003c\/li\u003e\n\u003cli\u003eVibration: 5 grms (10–400 Hz)\u003c\/li\u003e\n\u003cli\u003eIngress: IP67\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40°F to 185°F (−40°C to +85°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eProduct Description\u003c\/h5\u003e\n\u003cp\u003eThe CHCNav TD63 Pro is a fully automatic 3D control system designed to enhance the precision, productivity, and consistency of earthmoving and fine-grading operations. Combining dual GNSS antennas with a 100 Hz IMU sensor, it achieves ±2 cm accuracy and precise blade control—regardless of machine position or operator experience. The result is a perfectly finished grade with minimal staking, reduced rework, and faster project completion.\u003c\/p\u003e\n\u003cp\u003ePowered by CHCNav’s DO-Tech algorithm, the TD63 Pro intelligently controls hydraulic flow to maintain grade accuracy at varying speeds and on any terrain. Designed with the operator in mind, the MCNAV control tablet features a clear, responsive interface that shortens the learning curve. Installation and calibration are straightforward—complete setup can be done in under six hours, with 30-minute calibration. The TD63 Pro supports a wide range of coordinate systems, radio protocols, and design file formats.\u003c\/p\u003e\n\u003ch5\u003eBrochures and Manuals\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"CHCNav TD63 Pro Automatic 3D Control System for Dozers Product Datasheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0694\/0337\/7960\/files\/CHCNav_TD63_PRO_automatic_3D_control_system_for_dozers_Brochure.pdf?v=1759768002\" target=\"_blank\"\u003eCHCNav TD63 Pro Automatic Control System for Dozers Product Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Benchmark Tool \u0026 Supply","offers":[{"title":"Default Title","offer_id":47850561995003,"sku":"TD63-Pro","price":25635.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/1540\/9743\/files\/CHCNav_TD63_Pro_3D_Automatic_Control_System_for_Dozers.jpg?v=1768238864"},{"product_id":"chcnav-easynav-emg100-3d-excavator-system","title":"CHCNav EasyNav EMG100 3D Excavator Guidance System","description":"\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type\u003c\/strong\u003e: 3D excavator guidance with in-field surface design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGNSS Constellations\u003c\/strong\u003e: GPS, GLONASS, BeiDou, Galileo, QZSS; L-Band support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy\u003c\/strong\u003e: Centimeter-level (RTK), real-time cut\/fill volume display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Compatibility\u003c\/strong\u003e: Swivel\/offset\/triple booms; multiple bucket profiles; tilt bucket support (optional IMU)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eScreen: 10.1\", 1024 × 600, ~750 cd\/m²\u003c\/li\u003e\n\u003cli\u003eOS\/CPU\/Memory: Android 6; Quad-core 1.2 GHz; 2 GB RAM \/ 16 GB ROM\u003c\/li\u003e\n\u003cli\u003eIngress\/Vibration\/Shock: IP69K; 7.7 Grms (10–1000 Hz); 50 g \/ 11 ms\u003c\/li\u003e\n\u003cli\u003ePower: 7–36 V DC input\u003c\/li\u003e\n\u003cli\u003eIngress Protection: IP65\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -22°F to +158°F (−30°C to +70°C)\u003c\/li\u003e\n\u003cli\u003eWeight: 3.31 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGNSS Antenna\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eGain \/ Noise Figure: 40 ± 2 dB\u003c\/li\u003e\n\u003cli\u003eShock: 50 g \/ 11 ms\u003c\/li\u003e\n\u003cli\u003eIngress: IP68\u003c\/li\u003e\n\u003cli\u003ePower: 3.3–12 V DC\u003c\/li\u003e\n\u003cli\u003eVibration: MIL-STD-810H, 7.7 G\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40°F to +185°F (−40°C to +85°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIMU Sensor\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eDimensions: 48.9 × 109 × 27.3 mm\u003c\/li\u003e\n\u003cli\u003eAccuracy (RMS): Static ±0.05°, Dynamic ±0.1°\u003c\/li\u003e\n\u003cli\u003eShock: 50 g \/ 11 ms\u003c\/li\u003e\n\u003cli\u003eIngress: IP69K\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40°F to +167°F (−40°C to +75°C)\u003c\/li\u003e\n\u003cli\u003eWeight: 0.25 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eProduct Description\u003c\/h5\u003e\n\u003cp\u003eThe EasyNAV EMG100 3D Excavator System is a cost-effective entry into 3D machine control for small to mid-scale jobs. Operators get centimeter-level guidance for slope\/embankments, trenching, plane cuts, and foundations, with real-time cut\/fill volumes to reduce rework. On-machine surface design lets crews create and modify simple plans in the field, minimizing survey callouts and keeping work moving.\u003c\/p\u003e\n\u003cp\u003eOptimized hardware and excavator algorithms shorten setup and training. Most machines are up and running in under 2 hours, calibration takes about 15 minutes, and the display makes it easy for new and experienced operators alike. The system supports swivel\/triple booms, tilt buckets (add optional IMU), multiple bucket profiles, and connects to GNSS RTK via network or base—delivering a reliable, repeatable workflow for day-to-day production. Package includes installation, CPC TrueRTK (1 year), and a 1-year support and SIM plan for immediate, out-of-the-box productivity.\u003c\/p\u003e\n\u003ch5\u003eIn the Box\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eEasyNAV System Kit - 8007010064    \u003c\/li\u003e\n\u003cli\u003eEasyNAV Installation    \u003c\/li\u003e\n\u003cli\u003eCPC-1Year Point One Nav 1 Year 1 User    \u003c\/li\u003e\n\u003cli\u003eiSite14 Benchmark iSite 1 Year Support \u0026amp; Data Super SIM Plan    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eBrochures and Manuals\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"CHCNav EasyNav EMG100 3D Excavator System Product Datasheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0694\/0337\/7960\/files\/CHCNav_EasyNAV_EMG100_3D_Excavator_System_Brochure.pdf?v=1759761627\" target=\"_blank\"\u003eCHCNav EasyNav EMG100 3D Excavator System Product Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Benchmark Tool \u0026 Supply","offers":[{"title":"Default Title","offer_id":47850562093307,"sku":"EasyNav Promo","price":14000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/1540\/9743\/files\/CHCNav_EasyNav_EMG100_3D_Excavator_System.jpg?v=1768238864"},{"product_id":"benchmark-supply-i83-rover-surveying-package-i83-rsv","title":"Benchmark Supply i83 Rover Surveying Package","description":"\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e Channels\u003c\/strong\u003e: 1408\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Constellations\u003c\/strong\u003e: GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e RTK Initialization\u003c\/strong\u003e: Typically \u0026lt; 10 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e RTK Accuracy\u003c\/strong\u003e: H: 8 mm + 1 ppm RMS; V: 15 mm + 1 ppm RMS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e IMU Tilt Compensation\u003c\/strong\u003e: Up to 60°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Internal UHF Radio\u003c\/strong\u003e: 2W (410–470 MHz), range up to 15 km (optimal conditions)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Battery Life\u003c\/strong\u003e: Up to 34 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Communication Interfaces\u003c\/strong\u003e: Bluetooth, Wi-Fi, NFC, 4G LTE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Ports\u003c\/strong\u003e: USB Type-C, SIM slot, external antenna port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Ingress Protection\u003c\/strong\u003e: IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Shock Resistance\u003c\/strong\u003e: 2 m pole drop on concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Operating Temperature\u003c\/strong\u003e: -40°F to 149°F (-40°C to +65°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eProduct Description\u003c\/h5\u003e\n\u003cp\u003eThe Benchmark Supply's i83 Rover Surveying Package (i83-RSV) delivers a complete field-ready RTK solution for high-precision data collection in topographic surveys, construction layout, excavation control, and post-construction verification.\u003c\/p\u003e\n\u003cp\u003eAt its core is the i83 GNSS receiver (Innovation by CHC, Performance for You), a compact yet powerful rover featuring 1408 channels, multi-constellation support, and iStar 2.0 technology for fast, accurate satellite acquisition—even in obstructed environments.\u003c\/p\u003e\n\u003cp\u003eEquipped with an internal 2W UHF radio, the i83 offers a communication range of up to 15 km under optimal conditions and features advanced tilt compensation (up to 60°) with minimal horizontal uncertainty, making it ideal for uneven terrain or hard-to-reach points. With up to 34 hours of battery life, it supports extended field sessions without interruption.\u003c\/p\u003e\n\u003cp\u003ePaired with an 8\" Active5 Android Tablet preloaded with LandStar 8 software, this package allows for intuitive survey workflows, visual stakeout, and seamless cloud connectivity. The package also includes one-year subscription of Control Point Corrections TrueRTK (powered by Point One Navigation) for centimeter-level accuracy. Accessories such as a carbon fiber pole, wide base topo shoe, clamp, socket arm, and bipod make this bundle practical and ready to deploy straight out of the box.\u003c\/p\u003e\n\u003ch5\u003eIn the Box\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) i83 GNSS Receiver\u003c\/li\u003e\n\u003cli\u003e(1) 8\" Active5 Tablet\u003c\/li\u003e\n\u003cli\u003e(1) SitePro Pole Clamp w\/ Ball and Socket (10-52160)\u003c\/li\u003e\n\u003cli\u003e(1) Socket Arm (RAM-B-103U)\u003c\/li\u003e\n\u003cli\u003e(1) LandStar 8 App\u003c\/li\u003e\n\u003cli\u003e(1) Tiger Supplies Wide Base Topo Shoe\u003c\/li\u003e\n\u003cli\u003e(1) Seco Thumb-Release Bipod - Fluorescent Yellow\u003c\/li\u003e\n\u003cli\u003e(1) Unicontrol Tablet Holder 8'\u003c\/li\u003e\n\u003cli\u003eCPC TrueRTK (1 Year Subscription)\u003c\/li\u003e\n\u003cli\u003eiSite 1 Year Support \u0026amp; Data Super SIM Plan\u003c\/li\u003e\n\u003cli\u003eTablet Power Bank Kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Benchmark Tool \u0026 Supply","offers":[{"title":"Default Title","offer_id":47850562060539,"sku":"i83-RSV","price":9675.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/1540\/9743\/files\/Benchmark_Tool_and_Supply_i83_Rover_Surveying_Package_-_i83-RSV_6ccc7dd5-d8ac-4b3c-b361-4ebefe540ccb.jpg?v=1768238865"},{"product_id":"chcnav-mcnav-tx73-3d-guidance-system-for-excavators","title":"CHCNav MCNAV TX73 3D Guidance System for Excavators","description":"\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Type\u003c\/strong\u003e: 3D excavator guidance with real-time RTK and IMU integration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGNSS Constellations\u003c\/strong\u003e: GPS, GLONASS, BeiDou, Galileo, QZSS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported File Formats\u003c\/strong\u003e: *.LandXML, *.DWG, *.DXF, *.CAL, *.JXL, *.LOC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCloud Platform\u003c\/strong\u003e: iSite (remote data sync, troubleshooting, OTA updates)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver (CHCNav MC300)\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eRTK Accuracy: H: 8 mm + 1 ppm RMS; V: 15 mm + 1 ppm RMS\u003c\/li\u003e\n\u003cli\u003eIngress Protection: IP67\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -22°F to 149°F (-30°C to +65°C)\u003c\/li\u003e\n\u003cli\u003eWeight: 2.45 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay (MCPad300)\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eScreen: 10.1″ touch screen (1920 × 1200 px)\u003c\/li\u003e\n\u003cli\u003eOperating System: Android 14, 8-core CPU up to 2.2 GHz, 6 GB RAM + 64 GB storage\u003c\/li\u003e\n\u003cli\u003eIngress Protection: IP67\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -22°F to 140°F (-30°C to +60°C)\u003c\/li\u003e\n\u003cli\u003ePower: 7–36 V DC input\u003c\/li\u003e\n\u003cli\u003eWeight: 3.30 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIMU Sensor (IS300)\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eRMS Accuracy: Dynamic ±0.1°, Static ±0.05°\u003c\/li\u003e\n\u003cli\u003eShock: 50G\/ 11 ms\u003c\/li\u003e\n\u003cli\u003eIngress Protection: IP69K\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: −40°F to +167°F (−40°C to +75°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGNSS Antenna (AT315)\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eIngress Protection: IP68\u003c\/li\u003e\n\u003cli\u003eGain: 40 ± 2 dB\u003c\/li\u003e\n\u003cli\u003eNoise: ≤2 dB\u003c\/li\u003e\n\u003cli\u003eShock: 40G\/ 11 ms\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: −40°F to +167°F (−40°C to +75°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eProduct Description\u003c\/h5\u003e\n\u003cp\u003eCHCNav MCNAV TX73 is designed for demanding construction sites. The system gives operators full control of depth, slope, and alignment using advanced GNSS RTK receivers and IMU sensors. With instant bucket-tip feedback and real-time surface comparison, jobs finish faster, cleaner, and with fewer grade checks.\u003c\/p\u003e\n\u003cp\u003eThe TX73’s powerful CAD-based 3D interface and color-coded maps let crews visualize progress directly in-cab. Operators can customize layouts, monitor cut\/fill data, and switch effortlessly between 2D and 3D views. With broad attachment compatibility—including Engcon and Steelwrist tiltrotators—the TX73 adapts easily to complex projects. Its rugged hardware—featuring the MC300 receiver, IS300 IMU, and AT315 GNSS antennas—ensures reliability in harsh environments.\u003c\/p\u003e\n\u003ch5\u003eIn the Box\u003c\/h5\u003e\n\u003cstrong\u003eBasic Model\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eMCNAV TX73 Basic Excavator System - 8007010062\u003c\/li\u003e\n\u003cli\u003eCHCNAV Installation    \u003c\/li\u003e\n\u003cli\u003eCPC-1Year Point One Nav 1 Year 1 User    \u003c\/li\u003e\n\u003cli\u003eiSite14 Benchmark iSite 1 Year Support \u0026amp; Data Super SIM Plan    \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cstrong\u003e3D Model\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eMCNAV TX73 3D Excavator System\u003c\/li\u003e\n\u003cli\u003eCHCNAV Installation    \u003c\/li\u003e\n\u003cli\u003eCPC-1Year Point One Nav 1 Year 1 User    \u003c\/li\u003e\n\u003cli\u003eiSite14 Benchmark iSite 1 Year Support \u0026amp; Data Super SIM Plan    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eBrochures and Manuals\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"CHCNav MCNAV TX73 3D Guidance System for Excavators Product Datasheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0694\/0337\/7960\/files\/CHCNav_MCNav_TX73_Exacavator_System_Brochure.pdf?v=1759764151\" target=\"_blank\"\u003eMCNAV TX73 3D Guidance System Product Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Benchmark Tool \u0026 Supply","offers":[{"title":"Basic","offer_id":47850562126075,"sku":"TX73 Basic Promo","price":23700.0,"currency_code":"USD","in_stock":true},{"title":"3D","offer_id":47850562158843,"sku":"TX73 3D Promo","price":35700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/1540\/9743\/files\/CHCNav_MCNAV_TX73_3D_Guidance_System_for_Excavators.jpg?v=1768238864"},{"product_id":"benchmark-supply-i83-and-ebase-base-rover-surveying-package-ibase-i83-brsv","title":"Benchmark Supply i83 \u0026 eBase Base and Rover Surveying Package","description":"\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eGNSS Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite Constellations\u003c\/strong\u003e: GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Channels\u003c\/strong\u003e: 1408-channel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePositioning \u0026amp; Accuracy\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTK Accuracy\u003c\/strong\u003e: Horizontal: ±8 mm + 1 ppm; Vertical: ±15 mm + 1 ppm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization Time\u003c\/strong\u003e: \u0026lt;10 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt Compensation\u003c\/strong\u003e: Up to 60° (Auto-IMU) with 2.5 cm accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRadio \u0026amp; Communication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadio Frequency\u003c\/strong\u003e: 410-470Mhz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF Radio (iBase)\u003c\/strong\u003e: 5W, internal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Range\u003c\/strong\u003e: Up to 25 km\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterference Monitoring\u003c\/strong\u003e: Real-time UHF self-check \u0026amp; auto channel selection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication Ports\u003c\/strong\u003e: Bluetooth, Wi-Fi, NFC, Type-C USB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower Source\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source\u003c\/strong\u003e: Li-Ion Battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Hours (eBase)\u003c\/strong\u003e: Up to 12 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Hours (i83)\u003c\/strong\u003e: Up to 34 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDurability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection\u003c\/strong\u003e: IP67, withstands 2m pole drop on concrete\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eProduct Description\u003c\/h5\u003e\n\u003cp\u003eThe Benchmark Supply's i83 + eBase GNSS Base and Rover Package is a full-featured RTK solution tailored for high-precision performance and rugged reliability.\u003c\/p\u003e\n\u003cp\u003eBenchmark's eBase GNSS Base Station (Innovation by CHC, Performance for You) simplifies setup with an integrated 5-watt UHF radio and internal battery—eliminating the need for external cables, radios, or batteries. It continuously checks for UHF interference and automatically selects the best channel, ensuring clear signal transmission even in congested environments.\u003c\/p\u003e\n\u003cp\u003ePaired with the eBase is the i83 GNSS Rover, featuring a powerful 1408-channel GNSS engine that supports all major constellations (GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS). Its built-in auto-IMU tilt compensation (up to 60°) ensures survey-grade accuracy even when the pole isn’t perfectly level, and its dual-battery system ensures extended uptime in the field.\u003c\/p\u003e\n\u003cp\u003eThis package also includes one-year subscription of Control Point Corrections TrueRTK (powered by Point One Navigation) for centimeter-level accuracy and a rugged 8\" Android Active5 Tablet, preloaded with LandStar 8 field software. With its intuitive interface and map-centric workflow, LandStar 8 lets users perform coordinate geometry (COGO), stakeout, volume computation, and real-time data logging with ease.\u003c\/p\u003e\n\u003cp\u003eIn addition, the package includes all the essential accessories for immediate field use: GPS pole, a prism pole bipod, and aluminum bipod.\u003c\/p\u003e\n\u003ch5\u003eIn the Box\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) eBase GNSS Receiver\u003c\/li\u003e\n\u003cli\u003e(1) i83 GNSS Receiver\u003c\/li\u003e\n\u003cli\u003e(1) 8\" Active5 Tablet\u003c\/li\u003e\n\u003cli\u003e(1) SitePro Pole Clamp w\/ Ball and Socket (10-52160)\u003c\/li\u003e\n\u003cli\u003e(1) Socket Arm (RAM-B-103U)\u003c\/li\u003e\n\u003cli\u003e(1) LandStar 8 App\u003c\/li\u003e\n\u003cli\u003e(1) Tiger Supplies Wide Base Topo Shoe\u003c\/li\u003e\n\u003cli\u003e(1) BASE POLE 7' Tube Steel GPS Base Pole\u003c\/li\u003e\n\u003cli\u003e(1) Seco Thumb-Release Bipod - Fluorescent Yellow\u003c\/li\u003e\n\u003cli\u003e(1) Unicontrol Tablet Holder 8'\u003c\/li\u003e\n\u003cli\u003eCPC TrueRTK (1 Year Subscription)\u003c\/li\u003e\n\u003cli\u003eTablet Power Bank Kit includes 18w fast charging power bank, USB-a to USB-micro power bank charging cable, power bank tablet clamp, USB-a to USB-c tablet fast charging cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Benchmark Tool \u0026 Supply","offers":[{"title":"Default Title","offer_id":47850562191611,"sku":"iBase-i83-BRSV","price":17580.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/1540\/9743\/files\/Benchmark_Supply_eBase_and_i83_Base_and_Rover_Surveying_Package.jpg?v=1768238872"},{"product_id":"benchmark-supply-f8-and-ebase-base-rover-surveying-package-ibase-i89-brsv","title":"Benchmark Supply F8 \u0026 eBase Base and Rover GPS Surveying Package","description":"\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eGNSS Performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels\u003c\/strong\u003e: 1408\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported Constellations\u003c\/strong\u003e: GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTK Accuracy\u003c\/strong\u003e: 8 mm + 1 ppm (H), 15 mm + 1 ppm (V)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization Time\u003c\/strong\u003e: \u0026lt;10 sec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReacquisition Time\u003c\/strong\u003e: \u0026lt;1 sec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold Start\u003c\/strong\u003e: \u0026lt;45 sec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization Reliability\u003c\/strong\u003e: \u0026gt;99.99%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUHF Radio Communication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eeBase\u003c\/strong\u003e: 5W UHF radio, 410–470 MHz, up to 25 km range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eF8\u003c\/strong\u003e: 1W UHF Radio, 410-470 Mhz, , 3–8 km range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower \u0026amp; Battery\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eeBase Power Source\u003c\/strong\u003e: (2)x 7.4V\/7.0Ah Non-Removable Li-Ion Battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Hours\u003c\/strong\u003e: Up to 12 hours (eBase); Upto 16.5 hours (F8)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIngress Protection\/Durability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eeBase\u003c\/strong\u003e: IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eF8\u003c\/strong\u003e: IP68\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eProduct Description\u003c\/h5\u003e\n\u003cp\u003eThe Benchmark Supply's F8 and eBase Base \u0026amp; Rover Surveying Package delivers a high-performance RTK solution engineered for demanding field applications such as construction layout, topographic surveys, mining, and cadastral mapping. Designed with versatility and portability in mind, both the eBase and F8 GNSS receivers (Innovation by CHC, Performance for You) are interchangeable, allowing either unit to operate as a base or a rover.\u003c\/p\u003e\n\u003cp\u003eThe eBase base station features an internal 5-watt UHF radio, offering RTK coverage up to 25 km in optimal conditions—all without external batteries, cables, or radios. It includes built-in real-time interference self-checking, helping users find the best available frequency for uninterrupted data transmission.\u003c\/p\u003e\n\u003cp\u003eThe F8 GNSS rover brings together lightweight construction, advanced iStar 2.0 technology for superior ionospheric error mitigation, and a 200Hz Auto-IMU with tilt compensation up to 60°—allowing efficient stakeouts in challenging terrain. It’s also equipped with dual cameras for visual surveying, ideal for capturing high-accuracy data and site photos on the go.\u003c\/p\u003e\n\u003cp\u003eField operations are streamlined through the pre-installed LandStar 8 software on the included 8\" Active5 Android Tablet. With its MetaCAD engine, modular workflow support, and cloud connectivity, LandStar 8 enables users to execute and manage all project types—line work, road design, volume calculations, and more—with precision and ease. The package also includes one-year subscription of Control Point Corrections TrueRTK (powered by Point One Navigation) for centimeter-level accuracy, GPS pole and aluminum bipod.\u003c\/p\u003e\n\u003ch5\u003eIn the Box\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) eBase GNSS Receiver\u003c\/li\u003e\n\u003cli\u003e(1) F8 GNSS Receiver\u003c\/li\u003e\n\u003cli\u003e(1) 8\" Active5 Tablet\u003c\/li\u003e\n\u003cli\u003e(1) SitePro Pole Clamp w\/ Ball and Socket (10-52160)\u003c\/li\u003e\n\u003cli\u003e(1) Socket Arm (RAM-B-103U)\u003c\/li\u003e\n\u003cli\u003e(1) LandStar 8 App\u003c\/li\u003e\n\u003cli\u003e(1) Tiger Supplies Wide Base Topo Shoe\u003c\/li\u003e\n\u003cli\u003e(1) BASE POLE 7' Tube Steel GPS Base Pole\u003c\/li\u003e\n\u003cli\u003e(1) Seco Thumb-Release Bipod - Fluorescent Yellow\u003c\/li\u003e\n\u003cli\u003e(1) Unicontrol Tablet Holder 8'\u003c\/li\u003e\n\u003cli\u003eCPC TrueRTK (1 Year Subscription)\u003c\/li\u003e\n\u003cli\u003eTablet Power Bank Kit includes 18w fast charging power bank, USB-a to USB-micro power bank charging cable, power bank tablet clamp, USB-a to USB-c tablet fast charging cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Benchmark Tool \u0026 Supply","offers":[{"title":"Default Title","offer_id":47850562224379,"sku":"iBase-i89-BRSV","price":19580.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/1540\/9743\/files\/Benchmark_Supply_F8_and_eBase_Base_and_Rover_Surveying_Package.jpg?v=1768238872"},{"product_id":"benchmark-supply-i83-and-f8-base-rover-surveying-package-i83-i89-brsv","title":"Benchmark Supply i83 \u0026 F8 Base and Rover Surveying Package","description":"\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eGNSS Performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels\u003c\/strong\u003e: 1408 with iStar 2.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported Constellations\u003c\/strong\u003e: GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTK Accuracy\u003c\/strong\u003e: 8 mm + 1 ppm (H), 15 mm + 1 ppm (V)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization Time\u003c\/strong\u003e: \u0026lt;10 sec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReacquisition Time\u003c\/strong\u003e: \u0026lt;1 sec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold Start\u003c\/strong\u003e: \u0026lt;45 sec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitialization Reliability\u003c\/strong\u003e: \u0026gt;99.99%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUHF Radio Communication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ei83\u003c\/strong\u003e: 2W UHF radio, 410–470 MHz, up to 15 km range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eF8\u003c\/strong\u003e: 1W UHF Radio, 410-470 Mhz, , up to 8 km range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower \u0026amp; Battery\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ei83 Power Source\u003c\/strong\u003e: 7.2V\/9.9Ah Non-Removable Li-Ion Battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Hours\u003c\/strong\u003e: Up to 36 hours (i83); Up to 16.5 hours (F8)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIngress Protection\/Durability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ei83\u003c\/strong\u003e: IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eF8\u003c\/strong\u003e: IP68\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eProduct Description\u003c\/h5\u003e\n\u003cp\u003eThe Benchmark Supply's i83 and F8 Base \u0026amp; Rover Surveying Package combines two high-performance GNSS receivers in a versatile setup designed for demanding field applications. With advanced satellite tracking, long battery life, and robust connectivity, this package is ideal for topographic surveys, construction layout, excavation control, and mining operation survey.\u003c\/p\u003e\n\u003cp\u003eBoth the i83 and F8 receivers (Innovation by CHC, Performance for You) are equipped with 1408 channels and iStar 2.0 technology, enabling full multi-constellation tracking across GPS, GLONASS, Galileo, BeiDou, QZSS, and IRNSS systems. This ensures faster satellite acquisition and higher positioning reliability even in challenging environments.\u003c\/p\u003e\n\u003cp\u003eThe F8 GNSS rover brings together lightweight construction, advanced iStar 2.0 technology for superior ionospheric error mitigation, and a 200Hz Auto-IMU with tilt compensation up to 60°—allowing efficient stakeouts in challenging terrain. It’s also equipped with dual cameras for visual surveying, ideal for capturing high-accuracy data and site photos on the go.\u003c\/p\u003e\n\u003cp\u003eThe F8 rover includes cutting-edge features such as dual cameras for augmented field data capture, iStar 2.0 ionospheric error mitigation, and a 200Hz IMU module for real-time tilt compensation up to 60°. Whether working near buildings, fences, or uneven terrain, the i89 ensures precision without the need for vertical pole alignment.\u003c\/p\u003e\n\u003cp\u003eThe included Active5 8-inch tablet is powered by Android and comes pre-installed with LandStar 8 software, offering a modern, map-centric interface for data collection, COGO, CAD integration, and surface modeling, and one-year subscription of Control Point Corrections TrueRTK (powered by Point One Navigation) for centimeter-level accuracy. Field-ready accessories are also included to ensure seamless setup and reliable use in all survey conditions.\u003c\/p\u003e\n\u003ch5\u003eIn the Box\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) i83 GNSS Receiver\u003c\/li\u003e\n\u003cli\u003e(1) F8 GNSS Receiver\u003c\/li\u003e\n\u003cli\u003e(1) 8\" Active5 Tablet\u003c\/li\u003e\n\u003cli\u003e(1) SitePro Pole Clamp w\/ Ball and Socket (10-52160)\u003c\/li\u003e\n\u003cli\u003e(1) Socket Arm (RAM-B-103U)\u003c\/li\u003e\n\u003cli\u003e(1) LandStar 8 App\u003c\/li\u003e\n\u003cli\u003e(1) Tiger Supplies Wide Base Topo Shoe\u003c\/li\u003e\n\u003cli\u003e(1) BASE POLE 7' Tube Steel GPS Base Pole\u003c\/li\u003e\n\u003cli\u003e(1) Seco Thumb-Release Bipod - Fluorescent Yellow\u003c\/li\u003e\n\u003cli\u003e(1) Unicontrol Tablet Holder 8'\u003c\/li\u003e\n\u003cli\u003eCPC TrueRTK (1 Year Subscription)\u003c\/li\u003e\n\u003cli\u003eTablet Power Bank Kit includes 18w fast charging power bank, USB-a to USB-micro power bank charging cable, power bank tablet clamp, USB-a to USB-c tablet fast charging cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Benchmark Tool \u0026 Supply","offers":[{"title":"Default Title","offer_id":47850562257147,"sku":"i83-i89-BRSV","price":18580.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/1540\/9743\/files\/Benchmark_Supply_F8_and_i83_Base_and_Rover_Surveying_Package.jpg?v=1768238872"},{"product_id":"benchmark-supply-i83-imu-rtk-gnss-receiver","title":"Benchmark Supply i83 IMU-RTK GNSS Receiver","description":"\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e Channels\u003c\/strong\u003e: 1408 channels with iStar 2.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Supported Constellations\u003c\/strong\u003e: GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS, NavIC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Initialization\u003c\/strong\u003e: \u0026lt;10s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e RTK Accuracy\u003c\/strong\u003e: H: 8 mm + 1 ppm; V: 15 mm + 1 ppm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e PPK Accuracy\u003c\/strong\u003e: H: 3 mm + 1 ppm; V: 5 mm + 1 ppm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e High-Precision Static Accuracy\u003c\/strong\u003e: H: 2.5 mm + 0.1 ppm; V: 3.5 mm + 0.4 ppm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e IMU Rate\u003c\/strong\u003e: 200 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Display\u003c\/strong\u003e: 1.1\" OLED Color Display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Operating Hours\u003c\/strong\u003e: Up to 35 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e IP Protection\u003c\/strong\u003e: IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Power Source\u003c\/strong\u003e: 7.2V\/9.9Ah Built-in Battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e: -40°F to +149°F (-40°C to +65°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eProduct Description\u003c\/h5\u003e\n\u003cp\u003eThe Benchmark Supply's i83 (Innovation by CHC, Performance for You) is a next-generation 1408-channel multi-band IMU-RTK GNSS receiver designed for maximum reliability in surveying, construction, and mapping applications. Equipped with Benchmark Supply’s iStar GNSS technology and a third-generation high-gain antenna, it delivers centimeter-level RTK precision—even in challenging environments.\u003c\/p\u003e\n\u003cp\u003eWith seamless wireless connectivity—including Bluetooth, Wi-Fi, NFC, 4G, and UHF—the i83 easily adapts to network RTK and base-rover setups. The integrated 200 Hz IMU supports calibration-free tilt compensation up to 30°, maintaining 3 cm accuracy even with pole tilt, boosting productivity by up to 30%.\u003c\/p\u003e\n\u003cp\u003eDesigned for demanding job sites, the i83 features a rugged IP67-rated magnesium alloy housing, shock resistance, and an ultra-efficient battery that powers up to 34 hours of RTK surveying. Whether you're working as a site foreman, engineer, or surveyor, the i83 combines power, intelligence, and durability to get the job done.\u003c\/p\u003e\n\u003ch5\u003eBrochures \u0026amp; Manuals\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0694\/0337\/7960\/files\/Benchmark_Supply_i83_GNSS_Receiver.pdf?v=1754073154\" title=\"Benchmark Supply i83 IMU-RTK GNSS Receiver Technical Datasheet\" rel=\"noopener\" target=\"_blank\"\u003eBenchmark Supply i83 IMU-RTK GNSS Receiver Technical Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Benchmark Tool \u0026 Supply","offers":[{"title":"Default Title","offer_id":47850562289915,"sku":"8001 010 239","price":7990.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/1540\/9743\/files\/Benchmark_Tool_and_Supply_i83_IMU-RTK_GNSS_Receiver.jpg?v=1768238873"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0286\/1540\/9743\/collections\/CHCNav_MCNAV_TX73_3D_Guidance_System_for_Excavators_5f023844-fcca-4a64-9b94-8ed257b53139.jpg?v=1772639988","url":"https:\/\/skidsteernation.com\/collections\/machine-control.oembed","provider":"Skid Steer Nation","version":"1.0","type":"link"}